How to Open an IGET One: Safe Teardown, Inspection & Recycling Guide

The IGET One 12000 features a purely non-rechargeable architecture. You will not find a Type-C port on this chassis. Instead, it relies on a massive 2700mAh pre-charged battery to power through its 18ml reservoir.

Most Aussie vapers search for teardown guides because the battery cut out early, or they mistakenly believe they can wire up a USB charger.

Trying to charge a non-rechargeable primary lithium cell can cause violent explosions. This teardown guide explains how to open the casing safely, recover leftover e-liquid, and strip the parts for local council recycling.

How to Open an IGET One: Safe Teardown, Inspection & Recycling Guide

Table of Contents

Quick Direct Answer

Can you recharge the IGET One, and how do you open it?
No, the IGET One is strictly non-rechargeable. Never connect stripped USB cables to its 2700mAh cell. To open it, wrap plier jaws in electrical tape, grip the bottom sealed airflow base, rock it horizontally to snap the interior retaining clips, and push the internal frame downward from the mouthpiece hole.

IGET One Specifications (Dual-Unit Teardown Data)

Familiarise yourself with the internal engineering before cracking open the shell:

Component / FeatureMetric UnitImperial UnitTeardown & Inspection Note
E-Liquid Reservoir18.0 ml0.61 fl ozSaturated cotton core with silicone chimney seal
Battery Cell2700 mAh (3.7V)9.99 WhNon-rechargeable primary lithium pouch cell
Coil Resistance0.6 Ω Dual Mesh0.6 Ω Dual MeshSupports Regular (12K) and Turbo (9K) modes
Device Weight~118.9 g4.19 ozHeavy-duty aluminium alloy + internal PCTG cradle
Charging InterfaceNone (Sealed)None (Sealed)Sealed bottom base; no PCB charging circuit
Smart ScreenCurved Digital DisplayCurved Digital DisplayDisplays juice percentage and remaining battery

⚠️ Critical Safety Warning: Never Attempt DIY Charging

Do not follow social media tutorials that show people stripping phone cables to charge disposable vapes.

The 2700mAh battery inside the IGET One lacks a secondary cathode layer and has no onboard Battery Management System (BMS) for charging.

Forcing 5 volts into this primary cell causes rapid internal overheating, electrolyte boiling, and explosive chemical fire within minutes.

🛠️ Step-by-Step Instructions: Opening the IGET One

Open your device only to recover wasted e-liquid or safely separate components for battery collection points.

Code
 
[Mouthpiece Top] ──> [Aluminium Chassis] ──> [PCTG Sled: 18ml Tank + 2700mAh Cell + Screen] ──> [Airflow Base]

Step 1: Loosen the Sealed Base Cap

The bottom plastic cap snaps into the aluminium casing using internal friction hooks.
Wrap the teeth of flat-nose pliers with electrical tape to avoid crushing the outer shell.
Clamp the base firmly and wiggle it horizontally by roughly 15 degrees until both internal clips release.

Step 2: Push Out the Internal Frame

Once the base loosens, set your pliers aside.
Insert a blunt plastic spudger into the top mouthpiece opening and apply even, downward pressure.
The 2700mAh cell, curved screen module, and 18ml e-liquid cradle will slide out through the bottom.

Step 3: Salvage Trapped E-Liquid

If your display shows 0% battery while significant liquid remains inside, peel back the silicone sleeve.
Use a blunt-tip syringe or fine pipette pressed against the cotton wick to draw out the leftover e-liquid.
Transfer this liquid into a refillable pod kit, and never attempt to squeeze the sponge with bare hands.

Step 4: Isolate and Disarm the Battery

Before sending the device to scrap, cut the wiring to prevent unintentional short circuits.
Snip the red positive lead first and wrap the exposed copper end immediately with electrical tape.
Cut the black negative lead second. Cutting both together with metal snips creates an instant electrical arc.

🍓 Real User Feedback & Flavour Durability

Real feedback from regular vapers across Sydney, Melbourne, and Brisbane highlights how the hardware performs:

  • 🔥 Mountain Spring Mint Ice: Exceptionally crisp with minimal sweetener gunk. Because it runs on a single high-output 2700mAh cycle without recharging dips, flavour output stays steady past 9,000 puffs.

  • 🔥 Tropical Orange Monster: Rich, zesty citrus profile. Switching to Turbo Mode burns through battery percentage faster, but the 0.6Ω dual mesh maintains thick vapour production throughout.

  • 🔥 Blackberry Ice: Balanced sweetness. Post-use teardowns show the organic cotton core stays surprisingly clean, with minimal coil charring compared to sweeter disposable vapes.

Aussie User Review:
“I cracked mine open thinking I could find a hidden charging port when the screen hit 0%. Found the massive 2700mAh brick instead. It’s strictly single-use, but at least the flavour didn’t drop off halfway through like rechargeable disposables often do.”

🇦🇺 Australian E-Waste Disposal Protocols

The 2700mAh cell inside an IGET One stores significant energy. Never throw it into standard council red-lid rubbish bins.

  • Aluminium Body: Wash out any residue and drop the bare metal tube into your yellow-lid recycling bin.

  • 2700mAh Battery: Tape both wire ends and drop the cell into a certified B-cycle drop box.

  • You can find free collection bins at major retail entrances across Australia, including Woolworths, Coles, Bunnings, and Officeworks.

  • Wick & Internal Plastic: Place used cotton and silicone parts inside a sealed bag and dispose of them via household waste.

❓ Frequently Asked Questions 

Does the IGET One have a hidden Type-C charging port?

No. The IGET One relies entirely on its built-in 2700mAh primary battery and contains no charging hardware.

Why is my screen showing 0% battery when there is still juice left?

Manufacturers calibrate battery levels conservatively to prevent the 0.6Ω dual mesh coil from firing dry cotton, which creates noxious burnt hits.

Why is the indicator screen flashing red when I draw?

A flashing indicator means the 2700mAh battery voltage has dropped below the operational threshold (around 3.2V). The device has reached the end of its life.


Skip the Teardown Hassle – Get Authentic Hardware

Stop wrestling with dead batteries and messy juice extractions. Buy authentic, factory-sealed devices backed by verified batch tracking and fast domestic dispatch across Australia.

[Shop Genuine IGET Australia Range Now – Fast Express Shipping]

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top